Pinecam.com
https://pinecam.com/forum/

Metal work?
https://pinecam.com/forum/viewtopic.php?f=16&t=235236
Page 1 of 1

Author:  girl-living-life [ May 1, 2020 8:17 am ]
Post subject:  Metal work?

Anyone have a resource for metal work? We want to have metal rails made for our deck. Sorry if this is posted in the wrong area, I'm sure the fab PC peeps will correct my error if it needs to go somewhere else. Thank you in advance!

Author:  DaisyLover [ May 1, 2020 8:44 am ]
Post subject:  Re: Metal work?

Here is a metal works company that advertises here on Pinecam -

https://www.pinecam.com/forum/viewtopic ... 7#p1829827

Author:  girl-living-life [ May 1, 2020 9:49 am ]
Post subject:  Re: Metal work?

Thanks, we're looking to have deck rail pieces made, so we'd need a vendor who can do powder coating and larger metal work. But their stuff looks neat!

Author:  chocolove [ May 1, 2020 10:21 am ]
Post subject:  Re: Metal work?

They do powder coating and custom work. I would give them a call and see if they can do what you want.

Author:  milotalon [ May 1, 2020 11:10 am ]
Post subject:  Re: Metal work?

DaisyLover wrote:
Here is a metal works company that advertises here on Pinecam -

https://www.pinecam.com/forum/viewtopic ... 7#p1829827


Thanks for the shout out! My metalwork is currently limited to signs, art, garden pieces, etc. I work with sheet metal up to 4' x 4' almost exclusively. I have fabricated some railings and gates for myself but I am not very efficient with my Mig or Tig welders where I can make a living off welding ;)

I can do railing inserts up to 4' but would use automotive finishes or rust patina for these.

I do powder coating but again I am limited to smaller pieces at the moment.

There is a very experienced welder up here who may be able to help (Rick Martin). I do not know how to contact him, however. Maybe Rick or one of his acquaintances will see your post and reach out. Good luck!

Author:  girl-living-life [ May 1, 2020 12:53 pm ]
Post subject:  Re: Metal work?

milotalon wrote:
DaisyLover wrote:
Here is a metal works company that advertises here on Pinecam -

https://www.pinecam.com/forum/viewtopic ... 7#p1829827


Thanks for the shout out! My metalwork is currently limited to signs, art, garden pieces, etc. I work with sheet metal up to 4' x 4' almost exclusively. I have fabricated some railings and gates for myself but I am not very efficient with my Mig or Tig welders where I can make a living off welding ;)

I can do railing inserts up to 4' but would use automotive finishes or rust patina for these.

I do powder coating but again I am limited to smaller pieces at the moment.

There is a very experienced welder up here who may be able to help (Rick Martin). I do not know how to contact him, however. Maybe Rick or one of his acquaintances will see your post and reach out. Good luck!


Thanks for reaching out! Your stuff looks great, and I'll be in touch about another project. Someone else gave me Mr. Martins' contact info.

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/